We are the #1 pool repair company in West Palm Beach, FL. We install pool pump brands like Hayward, Pentair, Jacuzzi and Jandy, as well as others. Our services include pool pump repairs, pool resurfacing, pool heater repairs, and pool leak detection for residential and commercial pools in West Palm Beach, FL.
We bring over 14 years of experience with repairs, installations, and project management. Palm Beach County pools need equipment that fits the circulation system and materials suited to the existing finish. We explain the repair options, installation scope and applicable manufacturer warranties before work begins.
We renewed the pool interior with standard plaster. Preparation and application took 6 days, followed by a 28 day water startup and curing care period. Filling, brushing and water checks follow the chosen finish’s instructions; swimming clearance is confirmed separately.
The project involved a leaky pool pump. The homeowner chose a variable speed replacement, with the new pump and agreed connections installed in 1 day. The equipment is matched to the existing circulation system.
The pool needed a top up every couple of days. A 2 hour detection visit investigated the water loss and narrowed the suspected leak location. The edited comparison shows a dye test illustration; the $450 charge covers detection, with any repair priced separately.
Choose the work that fits your pool.
A noisy or leaking pump may need a targeted repair. We check the seals, housing, motor and connected plumbing before recommending parts. The aim is to address the cause of weak circulation or water loss. Sound equipment does not need to be replaced just because one serviceable component has failed.
View service
Replacement makes sense when the condition or parts cost supports it. We compare a suitable pump with the existing filter, heater, plumbing and controls. Your pool use also matters when setting up operation. The estimate identifies the model and connection work so you can compare the complete installation.
View service
A fresh interior starts with the condition of the old surface. We assess roughness, loose material and the finish you want before setting the scope. Plaster, quartz and pebble options have different textures and care needs. Tile, coping and underlying repairs are discussed separately when they are outside the finish work.
View service
We assess heaters that stop, show faults or fail to maintain the expected temperature. The model, circulation and controls help guide the diagnosis. We compare repair options with replacement where appropriate. Any work involving electrical, gas or refrigerant systems needs the right qualified trade and a clearly defined scope.
View service
Frequent top ups deserve an explanation. We review the water loss pattern and inspect the pool fittings, equipment and connected plumbing. Appropriate tests help locate the likely source before a repair is proposed. Diagnosis and the resulting repair are separate scopes, so the next step is clear before work begins.
View service
The filter needs to work with the pump and pool demand. We assess seals, valves and serviceable media alongside the pressure vessel itself. A worn gasket can be a repair; a cracked tank is different. Replacement options must suit the actual circulation system and allow practical access for maintenance.
View service
A shared pool needs reliable circulation and a repair plan that fits its operation. We review pump components and the connected filtration system with the operator. Proposed repairs identify the parts and expected shutdown. Applicable review is considered before equipment changes, rather than treating the installation like an ordinary backyard pump.
View service
A commercial replacement must match the installation and operating requirements. We review equipment information, controls and connections before comparing options. Motor size alone is not a complete specification. The written scope identifies plumbing or electrical changes and provides a basis for scheduling the closure with the property team.
View serviceCondo and hospitality properties need finish work planned around a closure. We assess the interior, preparation and fittings before discussing materials. Operator coordination and applicable health review are part of the project plan. Startup, inspections and reopening are separate from the day the new finish is applied.
View serviceShared pool heating needs depend on the equipment and operating demand. We assess the fault alongside circulation and connected controls. The proposal explains compatible parts and any required installation changes. Access, qualified trade work and the property schedule guide how repairs are completed and the system is checked.
View serviceTop up records and operating logs can help explain a shared pool’s water loss. We review that information before selecting appropriate tests for fittings, equipment and plumbing. Access and safe closure are agreed with the operator. Findings then support a separate repair scope, rather than an open ended excavation allowance.
View service
Commercial filtration needs a system level assessment. We review the pressure equipment, serviceable components and connection layout before proposing work. Safe shutdown and access are coordinated with the property operator. Replacing a damaged vessel is a different scope from changing a seal, and the estimate should make that distinction clear.
View servicePlanning ranges with a clearly defined scope.
| Service | Typical price range |
|---|---|
| Pool pump repairPublished local planning range; parts and labor vary | $150 to $700 |
| Pool pump replacementModel, controls, plumbing and electrical scope | Equipment specific quote |
| Pool resurfacingSouth Florida finish guide; size and preparation vary | $4,500 to $15,000+ |
| Pool heater repairModel and failed component determine the repair | Diagnosis and written quote |
| Pool leak detectionPublished local diagnosis starting fee; repairs separate | From $425 |
| Service | Typical price range |
|---|---|
| Commercial pump repair / replacementEquipment, connections, closure and review requirements | System specific quote |
| Commercial heater repairsFault diagnosis, parts, qualified trades and access | Equipment specific quote |
| Commercial resurfacingPreparation, finish, health review and reopening plan | Measured project quote |
| Commercial leak detectionCircuit layout, access and testing requirements | System specific quote |
Published external planning benchmarks are not our fixed quotes. Scope and sources are recorded in the local guide below. Access, equipment, preparation and repairs affect price; commercial work is scoped separately.
West Palm Beach pool projects can involve plaster, quartz or pebble finishes, tiled waterlines and attached spas. Choose repair materials for the existing shell and surface. Saltwater describes how chlorine is produced; it does not identify the shell material or eliminate normal water care.
A South Florida contractor uses a 14 × 28 ft residential pool as a pricing reference, a 392 sq ft water footprint. That is a design example, not a verified West Palm Beach average. Measure the floor, walls, steps and benches before estimating resurfacing area; pool depth determines the volume.
House size is a poor guide to pool repair cost. An older home with a compact yard can have difficult equipment access, while a larger property may use standard residential equipment. Pool measurements, equipment labels and the work area provide the information needed for a useful estimate. No citywide average home size is claimed.
Start with the property address and the exact repair scope. City of West Palm Beach projects use the City’s building department; other municipalities and unincorporated Palm Beach County have their own permitting authority. Equipment, electrical, gas, plumbing and structural changes can affect the review. Public pools also need applicable DOH Palm Beach coordination, including resurfacing notification. Confirm requirements before work starts; the City’s general remodel timing is not a pool repair completion promise.
Checked November 6, 2026. Residential pump ranges come from Simple Pool Care’s local repair guide; the leak diagnosis starting fee is published by Leak and Subsurface Locators for Palm Beach and Broward counties. Finish ranges come from Superb Pools’ South Florida guide. These are external planning benchmarks, not this business’s fixed quotes or verified local transaction averages. Scope, size, finish, access and repairs change the total.
Describe the symptom, property type and equipment involved. Photos of labels and the work area help prepare for the visit.
Assess the condition and use appropriate checks to narrow the issue. Identify a leak or structural concern separately from surface wear.
Explain the findings and discuss a targeted repair, suitable replacement or finish choice. Make inclusions and separate work clear.
Confirm access, parts and timing. Account for the property operator and applicable review before a commercial closure or equipment change.
Complete the agreed work and check the relevant operation. Review the result against the approved scope before handing the project back.
Review operating settings or finish care. Explain startup and return to use conditions when they apply to the selected work.
Yes. Home pool repairs and shared pool projects have different equipment and operating needs. The four service pages explain the work and where a separate commercial plan is needed.
We assess the failed component and the condition of the full system. Parts availability, compatibility and the complete cost guide the recommendation.
Start with the property address and the exact repair scope. City of West Palm Beach projects use the City’s building department; other municipalities and unincorporated Palm Beach County have their own permitting authority. Equipment, electrical, gas, plumbing and structural changes can affect the review. Public pools also need applicable DOH Palm Beach coordination, including resurfacing notification. Confirm requirements before work starts; the City’s general remodel timing is not a pool repair completion promise.
No. Detection is the testing and findings. Parts, excavation or finish repairs may need a separate estimate after the source is identified.
Not automatically. The estimate should name the interior finish and explain whether tile, coping, deck work and underlying repairs are included.
It depends on the work. New finishes have startup and water care requirements; public pools may also have reopening conditions. Follow the project specific instructions.
